2008 Moto Guzzi California Classic
Technical Specifications
ENGINE
Type:
90° V-Twin, 4 stroke
Cooling system:
air cooled
Displacement:
1,064 cc
Bore and stroke:
92 x 80 mm
Compression ratio:
9.8 : 1
Timing system:
2 overhead valves moved by light alloy push–rod sand rocker arm with mechanical tappets
Valve timing:
Intake open - 24° B.T.D.C.
intake close - 52° A.B.D.C.
exhaust open - 54° B.B.D.C.
exhaust close - 22° A.T.D.C.
Maximum power:
54 kW at 6,400 rpm
Maximum torque:
94 Nm at 5,000 rpm
Fuel system:
Magneti Marelli IAW alfa-n system Multipoint phased sequential fuel; 2 throttle bodies of 40 mm with injectors Weber IW 031
Starting system:
electric
Ignition:
Magneti Marelli IAW 15RC electronic digital ignition; twin spark
Exhaust system:
steel, 2 tubes connected to an expansion room, that is connected to 2 steel mufflers; three-way catalyzer with Lambda sensor (Euro 3)
Homologation:
Euro 3
Lubrication:
with lobes pump and pressure regulator
TRANSMISSION
Gearbox:
5 speed, costant mesh gears with built-in cush drive
Internal ratios:
1° 14/28 = 1:2:
2° 18/25 = 1:1.389:
3° 21/22 = 1:1.048:
4° 23/20 = 1:0.870:
5° 28/21 = 1:0.750
Primary drive:
by helical gears, ratio 17/21 = 1: 1.235
Secondary drive:
shaft drive, ratio 8/33 = 1:4.125
Clutch:
dual disc dry with mechanical control
Rev: 1/11-2006
CHASSIS
Frame:
detachable tubular duplex cradle in special high-strengh steel
Wheelbase:
1,560 mm
Trail:
116 mm
Rake:
29°
Front suspension:
Marzocchi hydraulic telescopic fork, Ø 45 mm, adjustable separately
Front wheel travel:
140 mm
Rear suspension:
swing arm with 2 hydraulic shock absorbers, exstension adjustable
Rear wheel travel:
96 mm
Breaking system:
integral breaking system, with proportioning and delay valve
Front brake:
double Brembo Serie Oro stainless steel floating disc, Ø 320 mm, 4 piston calipers
Rear brake:
single Brembo stainless steel floating disc, Ø 282 mm, 2 piston calipers
Wheels:
Behr tubeless spoked steel rims
Front rim:
2.50” x 18”
Rear rim:
4.00” x 17”
Front tyre:
110/90 VB 18”
Rear tyre:
150/70 VB 17”
ELECTRICAL EQUIPMENT
Voltage:
12 V
Battery:
12 V – 30 Ah
Alternator:
12 V – 350 W
DIMENSIONS
Length:
2,380 mm
Width:
815 mm
Height:
1,150 mm
Seat height:
780 mm
Ground clearance:
190 mm
Handlebar height:
1,050 mm
Front footrest height:
326 mm
Rear footrest height:
385 mm
Dry weight:
251 kg
Fuel tank capacity:
19 litri
Reserve:
4 litre
Technical specifications of California Classic may change without notice.
| 
